If your faucet handle has a screw then it is very easy to remove but what to do when there is no visible screw. Usually, many faucets don’t have visible screws. This helps the faucet to look modern and sleek.
But how to remove kitchen faucet handle without screws. Don’t worry the task is pretty much simple and there is no need to hire a plumber.
All you need to do is collect the required tools and follow the below steps. In this guide, we had explained step by step process to remove the kitchen faucet handle without screws.
Why Would You Need To Remove Kitchen Faucet Handle?
There might be many reasons why you need to remove the kitchen faucet handle.
Faucet Is Leaking
When you are using your kitchen faucet for the long run, the chances are that it may start leaking or dripping. This is a very common problem and you have to fix it as soon as possible. To fix the problem you need to remove the faucet handle.
By removing the handle you can check the condition of the o-rings and valve seats to see if they need replacement. Once you know which part of the faucet has been damaged or worn out, you can replace the parts and stop the leak.
Replacing The Cartridge
If you are facing low water pressure in your faucet that means the cartridge is not working properly. Cartridge helps to stable the water pressure of the faucet.
But as your faucet gets old, the cartridge gets worn or damaged and it needs to be replaced. To replace the cartridge, you need to remove the handle of your kitchen faucet.
To Change The Filter
Usually, the filter is used to stop the bacteria, mineral deposits, and contaminated water so that you get fresh water through the faucet.
These filters need maintenance over time so that they work properly. That means you have to change the old filter with the new one and for that, you need to remove the faucet handle.
Replace The Actual Faucet Handle
You need to replace the faucet handle because it is faulty or damaged. The other reason could be you are dealing with stripped faucet handle that just turns automatically without adjusting the water flow. So here you need to replace the handle with a newer one.
To Clean The Faucet
If you want to deep clean your faucet then you have to remove the faucet handle. Sometimes debris or mineral deposits get stuck inside the faucet. Once you remove the handle you will get access to the inside area and you can easily clean it.
Tools Required To Remove Kitchen Faucet Handle
When you are dealing with a kitchen faucet, you need the right tools for the job. Here is the list of some tools that you need during the work.
- Flathead Screwdriver
- Allen Wrench
- Adjustable Wrench
- Pliers
- A faucet handle puller set
- Distilled White Vinegar (For cleaning mineral deposits)
- A Piece of cloth or towel
These are the tools that you need for the project, so gather all the tools before you start the work. Once you collect the tools now you have to learn how to remove the kitchen faucet handle without screws.
How To Remove Kitchen Faucet Handle Without Screws
Step 1: Turn Off The Water Supply
Before starting the work the first step to do is turn off the water supply of the kitchen faucet. Basically, there are two valves for hot and cold water. These valves are located under the kitchen sink.
Shut off both valves by turning them in the clockwise direction. If you don’t find these valves under the sink then you should turn off the main water supply line of the house.
Step 2: Drain The Remaining Water
After turning off the water supply, there might be still some water inside the pipe. So turn on the handle to drain the remaining water through the faucet. This step will help you to save your kitchen from flooding.
Step 3: Cover The Sink Drain
When you are working with the faucet, there are crucial nuts and small parts which can be fall into the sink. And you don’t want to lose these crucial nuts. So it is very important to cover the sink drain. You can cover the sink drain with any piece of cloth or a towel.
Step 4: Find And Remove The Cap
Now here comes the main step of removing the handle. If you are not able to see the screw that means your faucet has a cap under which the screw is hidden.
Now, the first thing you need to do is find the cap on the faucet handle. Usually, you will see the cap on the top of the faucet handle but some faucets have cap on the side of the handle.
Once you find the cap, you need to remove the cap by prying it off with a flat head screwdriver. Gently use the screwdriver to remove the cap otherwise the cap will be broken.
Step 5: Remove Hidden Screws From The Handle
After removing the cap, you can see the screw underneath the handle. Use a wrench or screwdriver to remove the screw from the handle.
Before you remove the screw it is important to cover the drain. In the above step, we had already covered the sink drain with a piece of cloth so if by mistake any screw falls into the sink it will not drain.
So it is very important to keep these screws in a safe place because once you complete the work these screws will be needed to tighten the faucet handle.
Step 6: Remove The Faucet Handle
Once you remove the screw, the handle will become loose and you can easily remove the handle. Pull the handle with your hand to remove it from the faucet body.
If you are not able to remove it with your hand that means it is stuck. Here you need to use a faucet handle puller or pliers to remove the handle.
Before removing the handle, wrap the faucet handle with a piece of cloth and then use the pliers. The cloth will help you to avoid scratches on the faucet. Because nobody wants scratches on their beautiful faucet.
Step 7: Repair Your Faucet
After removing the handle, you need to remove mineral deposits that build up in the faucet. Use vinegar to remove the mineral deposits from the faucet.
Apply vinegar on the mineral deposit area and leave it for 5-10 min and after that clean the faucet body with water.
If the faucet cartridge is broken then you need to replace the cartridge. Take your old cartridge to the hardware or home improvement store so that you get the exact model of the cartridge.
How To Remove Double Handle Faucet Without Screws
If your faucet handle has screws then it is very easy to remove. But what to do when there is no screw on the faucet handle. Don’t worry the task is very simple and you can easily do it by yourself.
You have to just follow the steps and your job is done. In this article, we will learn how to remove double handle kitchen faucets without screws.
Shut Off The Water
Firstly, turn off the water supply of the kitchen faucet. You will find two supply lines under the sink for hot and cold water.
Go under the sink and shut off both valves by rotating them in a clockwise direction. If there is no valve under the sink then turn off the main water supply of the house.
Cover The Drain
Make sure to cover the drain with a piece of cloth. Because there are small parts that can be fall into the sink drain.
Rotate The Handle Base
Now hold the faucet handle arm in place and at the same time rotate the base in an anticlockwise direction. Once the handle is loose, you can pull the handle to remove it.
Take Out The Screw
After removing the handle, you can see the screw holding the centerpiece underneath. Use a screwdriver to remove the screw.
Remove The Cartridge
After removing the screw, now you get access to the cartridge. You will notice a white cartridge underneath the handle. Use needle-nosed pliers to remove the cartridge. After removing the cartridge now you can replace it with a newer one.
How To Remove Kitchen Faucet Handle That Has Cap or Button Rather Than Screws
If your faucet has a cap or button rather than screws, then how to remove it? So in this article, we will learn how to remove a kitchen faucet handle that has a cap or button instead of screws.
Tools Required
- Flathead Screwdriver
- Allen Wrench
- Adjustable Wrench
- Pliers
- A faucet handle puller set
- Distilled White
- A Piece of cloth or towel
Turn Off The Water
Before you start the work, turn off the water supply of the kitchen faucet. You will find two valves under the sink for hot and cold water.
Go under the sink and shut off both valves by turning them in a clockwise direction. If you don’t have these valves under the sink then turn off the main water supply line of the house.
Locate & Remove The Cap or Button
If your faucet doesn’t have screws that mean it has a cap or button. You can find the cap or button on the front side of the handle or either on the side of the handle.
To remove the button you need to apply pressure on the edge of the button with a flat head screwdriver. You need to be very gentle while removing the button because they are fragile and can be broken.
Also, they are very small in size and can fall into the sink drain, so make sure to cover the drain with a cloth or towel.
Remove the Allen key from the handle
After removing the button you can see the Allen key instead of the screw. So here you need to use an Allen wrench to remove it.
Lift Out The Faucet Handle
After removing the Allen key, you can easily lift out the faucet handle. Once the handle is removed now you can repair your faucet or you can change the cartridge.
Conclusion
Whatever is the reason for removing the faucet handle, now you had learned how to remove the kitchen faucet handle without screws. But if you had never removed a faucet handle before, then this can be a challenging task for you. So we had explained in a simple way so that you can easily complete the job. And above methods are applicable to all faucet brands.