Can You Install A Kitchen Faucet Without The Sprayer?

Nowadays most kitchen faucets come with a sprayer. But what if you don’t want to install the sprayer.

As it is not always required to install a sprayer in your kitchen sink. You can easily do your daily task with a single handle faucet.

So, can you install a kitchen faucet without the sprayer?

Yes, you can install a kitchen faucet without the sprayer. If you have a sprayer and don’t want to utilize it, simply disconnect the extension line. And then take it out. You can install a single handle faucet to avoid using the sprayer.

However, if your faucet comes with a sprayer option, you should use them because they make the faucet more effective and easy to use.

But if you had decided to install a kitchen faucet without the sprayer. So the next part you have to understand is how to install a kitchen faucet without a sprayer. First, you should remove the old faucet and then install the new one.

In the below article we had explained a step by step process on how to install a kitchen faucet without the sprayer.

So let’s jump onto the installation process.

How To Install A Kitchen Faucet Without The Sprayer

The first step you need to do is remove the existing kitchen faucet before installing the new kitchen faucet without the sprayer.

If you don’t want to use the sprayer, simply disconnect the extension line. And then remove it. To avoid using the sprayer, you can install a single handle faucet.

Now you have two options to install a kitchen faucet, either you can do it yourself or you can hire a plumber. Hiring a plumber is a good option but they will cost you around $150 to $250.

But installing a kitchen faucet by yourself will save your hard earned money and believe me installing a kitchen faucet is not a difficult task, you just need some tools and a step by step guide.

So if you had decided to do it yourself, follow these simple steps.

Tools Required

First, you need to collect the necessary tools for the installation process. Here we had mentioned the required tools so that you can be ready for the handyman project.

  • Screwdriver
  • Faucet plate
  • A Towel
  • A Bucket
  • Faucet gasket
  • Basin wrench
  • New faucet
  • Adjustable wrench
  • Supply lines
  • Penetrating oil

Step 1: Remove The Old Kitchen Faucet

To install a new faucet, you need to remove the old kitchen faucet first. If you don’t know how to do it, there is nothing to worry about it. We’re here to help you.


Before starting the removal process, you should first clear the area under the kitchen sink. Usually, we store many kitchen items under the sink such as garbage disposals, random utensils, or cleaning solutions.

These are the things that block the workspace. To remove the kitchen faucet, you need some space under the sink. So that you can comfortably work without any inconvenience.

So it is important to clear the area under the sink. Also, clean the faucet countertop to avoid any disturbance during the removal process.


Now go under the sink and turn off the water supply valve. Basically, there are two valves for hot and cold water. Turn off the hot and cold water Shut off valves and don’t tighten them too much because it can break the handle of the valve.

If there is no shut-off valve under the sink, turn off the main water supply line of the house. After that turn on the faucet handle to drain the excess water from the faucet.


Then disconnect the faucet supply lines. Use a wrench or pipe wrench to remove the faucet supply lines. While removing the supply lines place the bucket to collect the extra water from the supply pipes. After disconnecting the supply lines, remove them from the faucet.


After disconnecting the supply lines from the faucet. Now take a screwdriver to unscrew the mounting nuts. Turn the screwdriver in an anticlockwise direction to loosen the nut.

If the nuts are hard to remove, use penetrating oil to make the job easier for you. Leave the oil for a few minutes to show its magic. Once the oil settles, unscrew the nut.


Once you remove the mounting nuts. Now you can take out your old faucet from the kitchen sink.

Step 2: Installing The New Kitchen Faucet

As you had decided to install a kitchen faucet without the sprayer, you can use a single handle faucet in the kitchen.

  1. Take your new faucet and insert it into the sinkhole. Make sure to remove the stripped set screws first.


  1. Now cover the sinkholes with a faucet plate. Basically, a faucet plate can cover 3 sinkholes. If your sink has 4th hole then it will remain uncovered because it is used for the sprayer. But you can cover it because you are not going to use it. A sinkhole cover can be used to cover the fourth hole.


  1. Take the new supply lines (both hot/cold water lines) and insert them into the faucet. Now go under the sink and tighten the mounting nuts. When you are tightening the nut make sure someone holds the faucet at that time. Use a pipe wrench to tighten the mounting nuts on the faucet.


  1. Now connect the supply lines to the valves. You can wrap the Teflon tape around the valve to make sure that there isn’t any leakage. Tighten the nuts with help of a wrench.


  1. Then turn on the main water valve as well as the faucet valve. Drain the water through the faucet for 2 minutes and check if there is any kind of leak. Always try to save water. Use a bucket to save the drained water.


  1. If you notice any leaks, use more Teflon tapes around the valve and rejoin them. If the leak doesn’t stop, call a plumber.


  1. If you already have a sprayer and don’t want to use it. Then remove it from under the sink and cover the hole with a sinkhole cover.

How To Cap Off A Kitchen Sprayer

The kitchen sprayer connects to your faucet and is helpful when it comes to cleaning dishes or winning a water fight.

But when your sprayer starts leaking from the hose, connectors, or the sprayer head, you need to immediately fix it or remove it.

If you had decided to remove the sprayer then it requires capping the connection point on the kitchen faucet.

It also requires covering the hole left in the sink or countertop when you remove the sprayer. Now the process of removing the kitchen sprayer is easy enough and won’t take too much of your time.

So let’s jump onto the removal process

1. Turn off the water supply valves under the kitchen sink. Turn on the faucet and press the trigger on the sprayer to drain any remaining water left in the supply lines, sprayer, and faucet.

2. Trace the sprayer hose from the end of the sprayer to where it joins to the faucet. Using pliers, loosen the connector that connects the sprayer hose to the faucet.

3. Disconnect the sprayer hose from the faucet to expose the male threads. Wipe the dry threads with a towel. Now you should wrap the threads with pipe joint tape.

4. Twist a 3/8-inch threaded brass flair cap onto the male threads. Tighten the cap with the help of pliers.

5. Go under the sink and loosen the mounting nut that secures the sprayer support to the sink or countertop. If you are unable to reach the mounting nuts with your hand, use a basin wrench.

6. Remove the mounting nut from the hose that is attached to the sprayer underneath the sink.

7. Take out the sprayer support and the sprayer from the sink or countertop hole.

8. After removing the sprayer, insert a sinkhole cover into the hole left by the sprayer. The way it secures the place depends on the style of the hole cover. Maybe it could snap-in or a mounting nut could hold it in place.

What Can Be Used To Cover The Sink Sprayer Hole?

Basically, you can use a deck plate to cover the sink sprayer hole. Some faucets packages come with a matching deck plate.

But you can also buy a separate one which will roughly come around between $15 to $20.

Additionally, there are some good accessories you can install in the sink sprayer hole. Also, these accessories are easily available in the market.

And the installation process is very simple, you can do this quickly, easily, and inexpensively. (Keep in mind the space requirements for accessories as well as the location of the faucet handle).

1. In-counter Soap Dispenser

The under-counter soap dispenser is one of the cheapest options, which costs you around $25.

This dispenser can be used in many ways, you can use it for hand soap, dish soap, lotion, or other liquids. Some people even install 2 of them.

The stainless steel model matches most of the stainless steel faucets. Also, dispenser pumps are available in many finishes such as brushed nickel and chrome.

Tip – when you are purchasing a kitchen sink soap dispenser, check the nozzle length. For example, a 3” long nozzle will be a good choice because it will extend over the sink. Thus making it comfortable to use.

2. Garbage Disposal Switch

Alternatively, you can move your garbage switch disposal next to the faucet. It’s more convenient and it frees up your wall switches to be used for something else.

Many people don’t realize how easy the installation process is (you can do it yourself).

This kitchen sink accessory is called an Air Switch Kit. You can buy it from Amazon and it will cost you approximately $40. The switch is compatible with any disposal unit. Plus, they are available in 10 different finishes.

So you can match it to your faucet, kitchen hardware, or countertop. You have to simply plug the air switch into the wall outlet underneath your kitchen sink.

After that, plug the garbage disposal into the air switch. For this, no special wiring is required.

3. Water Filter or Instant Hot Water Dispenser

Now you have two options either you can install an instant hot water dispenser or an under-counter water filtration unit depending on the location of the sink sprayer hole and the space you have available.

This sink accessory will cost you between $100 and $250. Without taking the help of a plumber, you can easily install the water filter (about $100) in less than 30 minutes.

Once the installation process is done, now you can enjoy fresh filter water without having an unattractive above-counter filter or purchasing bottled water.

The installation process for an instant hot water dispenser is also very simple. No tools are required during the installation process.

4. Glass Rinser

You can use a glass rinser to cover the extra hole in your sink. It is easy to use and keeps your cup clean that much simpler.

You have to simply install the glass rinser to a hot or cold water line and rinse any glass between 1” to 3.6” in diameter. They are available in 7 different finishes to match your faucet.

You will enjoy being able to washout water bottles, coffee cups, travel mugs, and baby bottles all from an empty hole that was just waiting for better use.

5. Lotion Dispenser

Many times you will find that your hands are dry after doing the dishes. You can easily get rid of dry hands by just adding a lotion dispenser into the sink sprayer hole.

You can install the dispenser in the empty space in your sink in a few minutes and use the lotion whenever you need it.

The cost of the dispenser is minimal and it is a much more attractive solution than leaving the space empty or having an unusable sprayer.


So the question asked was “can you install a kitchen faucet without the sprayer”. The simple answer is yes you can.

All you need to do is remove the old kitchen faucet and install the new one. Then you should cover the sprayer sinkhole or you can install any other kitchen accessories.

We hope you find this article helpful and thank you for reading it.